HU 
Termék konzultáció
Az e-mail címed nem kerül nyilvánosságra. A kötelező mezők meg vannak jelölve *
Copper clad aluminium (CCA) wire has emerged as a popular alternative to pure copper wire in various industries due to its cost-effectiveness, lightweight properties, and good conductivity.
Copper Clad Aluminium Wire (CCA Wire)
Copper clad aluminium wire consists of an aluminium core coated with a layer of copper, combining the benefits of both metals:
Cost Savings: Aluminium is cheaper than copper, reducing material costs by up to 30-50%.
Weight Reduction: Aluminium is lighter than copper, making CCA wire about 40-50% lighter than pure copper wire.
Conductivity: While pure copper has 100% conductivity (IACS), CCA wire typically offers 63-70% IACS, depending on the copper cladding thickness (usually 10-15% by volume).
Applications:
Electrical wiring in buildings
Power transmission lines
Consumer electronics
Copper Clad Aluminum Wire for Automotive
The automotive industry increasingly adopts copper clad aluminum wire for automotive applications due to its balance of performance and cost.
Advantages in Automotive Use:
Weight Reduction: Helps improve fuel efficiency in vehicles.
Corrosion Resistance: Copper cladding protects the aluminium core from oxidation.
Cost Efficiency: Reduces wiring harness costs without significant performance loss.
Performance Comparison (Automotive Wiring):
| Property | Pure Copper Wire | CCA Wire (Automotive Grade) |
|---|---|---|
| Conductivity (IACS) | 100% | 65-70% |
| Weight (kg/km) | 8.9 | 4.5-5.0 |
| Cost (vs. Copper) | 100% | 50-60% |
| Tensile Strength (MPa) | 200-250 | 120-150 |
While CCA wire has lower tensile strength than pure copper, proper design compensates for this in most automotive applications.
Copper Coated Aluminium Wire vs. Copper Clad Aluminium Wire
The terms copper coated aluminium wire and copper clad aluminium wire are sometimes used interchangeably, but there are differences:
Key Differences:
| Feature | Copper Clad Aluminium (CCA) | Copper Coated Aluminium |
|---|---|---|
| Manufacturing Process | Metallurgical bonding (cladding) | Electroplating or dipping |
| Copper Layer Thickness | 10-15% by volume | Thinner (1-5%) |
| Conductivity | 63-70% IACS | 60-65% IACS |
| Durability | More resistant to peeling | Prone to flaking |
| Cost | Slightly higher | Lower |
Conclusion: CCA wire is more durable and offers better performance, while copper coated aluminium wire is cheaper but less reliable for high-stress applications.
